1998 ETC - History codes that keep showing up

B2510 Steering Wheel Controls HVAC Key Stuck
C1783 ICCS2 DL Left Output Short CKT to GND
C1785 ICCS2 DL Right Output Short CKT to GND
P1644 Traction Control Delivered Torque Output Circuit

I have been clearing these codes everyday and they keep showing up as History, never current. Any ideas?

----------

This is the full list of codes I cleared a few days ago when I had the oil pressure switch and engine mounts replaced. So far only the codes above have reappeared but only as History.

B1341 Air Mix Door Two Movement Fault
B1656 EEPROM Write Error
B2107 Front Vertical Down Switch Failed
B2119 Lumbar Forward/Aft Sensor Failed
B2148 Right Front Mirror Vertical Position Sensor Circuit Low
B2510 Steering Wheel Controls HVAC Key Stuck
B2710 PASSKey Open/Shorted Pellet

C1287 Steering Sensor Rate Malfunction
C1783 ICCS2 DL Left Output Short CKT to GND
C1785 ICCS2 DL Right Output Short CKT to GND

P1602 Knock Sensor (KS) Module Performance
P1644 Traction Control Delivered Torque Output Circuit

U1040 Loss of Class 2 Communications with ABS
U1129 Loss of Communications with AMP